ARENAOX
GunSkins Universal Pistol Skin Compatible with Airsoft AEG and BB Gun- Vinyl Wrap - Trim to Install - 100% Waterproof - Non-Reflective Matte Finish - Made in USA
GunSkins Universal Pistol Skin Compatible with Airsoft AEG and BB Gun- Vinyl Wrap - Trim to Install - 100% Waterproof - Non-Reflective Matte Finish - Made in USA
Couldn't load pickup availability
- vinyl
- Made in the USA
- FITS ANY HANDGUN - Pistol Skins conform to any shape. Designed to fit any semi-automatic pistols with a barrel length of eight inches or less. Also can be installed on revolvers, airsoft, bb and paintball guns, too! Comes with two 4.75" x 8" frame pieces and one 3.75" x 8" slide piece.
- EASY TO INSTALL VINYL WRAP - Do it yourself installation means you have creative control. Choose how much or how little to wrap with the help of our one-of-a-kind precut templates and installation videos. Use a heat gun to conform the vinyl to the surface and a hobby knife to trim to fit. Install in just a few hours. No cure time, ready for immediate use!
- WATERPROOF NON-REFLECTIVE MATTE FINISH - GunSkins are made from high-performance, premium vinyl. This automotive grade vinyl is 100% waterproof and non-porous. This is perfect for hunting waterfowl when you are knee deep among the reeds. No rain, no rust, no worries!
- REMOVEABLE AND LEAVES BEHIND NO RESIDUE - This non-permanent finish will not alter the resell value of your gun. If you need to take it off, simply add heat and remove. The surface will be just as it was prior to installation. Switch patterns for different hunting seasons with ease!
- LIFETIME WARRANTY - This GunSkins product has a Lifetime Warranty which covers normal use by the initial user of this product. This GunSkins product will be free of fading for the duration of the warranty period as long as initial user has the product correctly installed on a firearm, firearm or other GunSkins approved application.
Pistol Skins are Do It Yourself Vinyl Wraps for Any Pistol
Cover and protect your handgun with a GunSkins Pistol Skin! Our precut template makes installation quick and easy. Simply clean the surface, peel and press, add heat to conform, and trim away any excess material. GunSkins offers top of line camouflage and specialty patterns to choose from, fit for any application.
GunSkins Pistol Skins are designed to fit any semi-automatic pistol or revolver, even airsoft replicas. The kit includes pieces for the left and right sides, and one additional piece for the slide or barrel. It is required to trim along the edge of your gun for the perfect fit.
Pistol Skin Kit Template with Precut Pieces
GunSkins Pistol Skins will fit most semi-automatic or revolver type pistols. The DIY vinyl wrap kit is generic and requires the user to trim to fit their specific model. This also includes airsoft replicas, and BB guns. The kit comes with the following precut pieces:
- Two 4.75" x 8” frame pieces
- One 3.75” x 8” slide piece
- Two 1” x 3.25” pieces of additional material
They are waterproof and have a non-reflective matte finish. Pistol Skins conform to any shape and are easy to install. For revolvers, use the slide piece to wrap the cylinder. If your gun is longer than 8", the Pistol Skin may not contain enough material to cover the entire surface. It's your gun, make it look just the way you want it to!
Features
- Universal Template
- 100% Waterproof
- Laminated Matte Finish
- Easy to Install
- Non-Permanent
- Made in USA
Step by Step Installation Instructions
CLEAN THE SURFACE
Use a gun-specific degreaser and a small brush to work away all dirt, oil, lubrication, and residue. Use rubbing alcohol to remove moisture. A clean gun makes for a clean install.
PEEL AND STICK
Peel the material off the template, one piece at a time. Place it centered on the surface and work it in using your fingers. Reposition until you are satisfied with the placement.
HEAT AND TRIM
Use a heat gun or blow dryer to get the vinyl to conform to the shape of the gun. Use a sharp hobby knife to trim away excess material. Heat again to finish.
Frequently Asked Questions
Why won't the vinyl stick to the surface of my gun?
You must thoroughly clean the gun/accessory before installing the wrap. Use a gun-specific degreaser and a small brush. Make sure to scrub all the recessed areas to remove oil and dirt. Wipe clean using a lint-free cloth or rinse with warm water and let air dry.
Can the wrap be removed?
Pistol Skins are removable and have no effect on the finish. To remove, heat the material with a heat gun/blow dryer and peel off piece by piece.
Will my holster affect the material?
Yes, holsters will create friction and rub against the vinyl along the edges of the gun. If the holster is adjustable we recommend loosening it accordingly. Otherwise, early wear is inevitable.
Will heat from the barrel melt the vinyl?
The heat from the barrel will not affect the material. However, we do not recommend wrapping the barrel if you fire using full auto or use a suppressor.
"Love my new wrap. Was my first time applying one and it was EXTREMELY easy and very fun to do. All you really need is just a heat gun and very sharp knife."
~ Nicholas H.
"I was a little apprehensive at first, but after watching some videos I felt confident in the process. Take your time and it should come together easily."
~ Robby L.
"I purchased the universal kit for my Taruas TX22. I was a bit nervous at first. I watched the GunSkins videos. The universal kit is the way to go for me."
~ John S.
"Looks great in my H&K P30."
~ Gary R.
The Leader in Vinyl Wraps for Firearms
GunSkins has been leading the DIY camouflage wrap movement since 2013. Easy to install pre-cut vinyl templates, GunSkins are an affordable aftermarket finish for your guns and gear. No other brand matches GunSkins in quality or variety of officially licensed patterns to choose from.
