Egg Sinker Mold Fishing Weight Molds with 5 Mold Cavities,1oz, 2oz, 3oz, 4oz, 5oz, Lead Sinker Molds with 2 Pull Pin

Brand: Cyiwniao

Color: ‎silver

Features:

• Package include: 1 x egg sinker mold, 2 x pull in.the sinker mold can casts 1, 2, 3, 4, and 5oz egg sinkers
• Usage Warnings: 1. Lead is a toxic material 2. Make sure you wear protective clothing when handling molds and must be careful when heating and pouring lead 3. Use dry molds as water can cause the molten lead to explode and cannot be handled properly When disposing of unwanted lead please take note of your local authority about appropriate methods.
• Steps for use before pouring: It is recommended to preheat the mold before use.Put scrap lead into saucepan and heat until molten . Once the lead has melted, use a cooking spoon to remove any impurities that have risen to the top. Place the hanger wire (only use wire if you are making a sinker that requires a hole in the center) and place it into the mold.
• Pouring step:After the above steps are ready, pour the molten lead into the mold until the cavity is filled. Wait 10 seconds or more, then proceed to open the mold. Use pliers to cut off the excess lead of the sinker, and the production is complete.
• Batch production: This fishing mold can easily produce a large number of fish pendants with multiple weights. The fishing weights can be easily matched with fish hooks and fishing lines. It is suitable for fishing enthusiasts to make their own fishing equipment and is ideal for outdoor fishing activities.

Binding: Sports

Details: Package include: 1 x egg sinker mold, 2 x pull in.the sinker mold can casts 1, 2, 3, 4, and 5oz egg sinkers

This fishing mold can easily produce a large number of fish pendants with multiple weights. The fishing weights can be easily matched with fish hooks and fishing lines. It is suitable for fishing enthusiasts to make their own fishing equipment and is ideal for outdoor fishing activities.

Usage Warnings: 1. Lead is a toxic material 2. Make sure you wear protective clothing when handling molds and must be careful when heating and pouring lead 3. Use dry molds as water can cause the molten lead to explode and cannot be handled properly When disposing of unwanted lead please take note of your local authority about appropriate methods.

Steps for use before pouring: It is recommended to preheat the mold before use.Put scrap lead into saucepan and heat until molten . Once the lead has melted, use a cooking spoon to remove any impurities that have risen to the top. Place the hanger wire (only use wire if you are making a sinker that requires a hole in the center) and place it into the mold.

Pouring step:After the above steps are ready, pour the molten lead into the mold until the cavity is filled. Wait 10 seconds or more, then proceed to open the mold. Use pliers to cut off the excess lead of the sinker, and the production is complete.

Package Dimensions: 11.2 x 3.3 x 3.1 inches