Avid BB7 MTB Cable Disc Brake Graphite, CPS, Rotor/Bracket Sold Separately

DISC BRAKE BED-IN PROCESS

All new brake pads and rotors should be put through a wear-in process known as bed-in prior to your first ride. This ensures the most consistent and powerful performance, along with the quietest braking in most riding conditions. This process heats up the brake pads and rotors, depositing an even layer of pad material to the braking surface of the rotor. This transfer layer optimizes braking performance.

Please note that the bed-in procedure requires heavy braking. Braking heavily when not familiar with the power and operation of disc brakes could cause you to crash. If you are unfamiliar with the power and operation of disc brakes, you should have the process performed by a qualified bicycle mechanic.

STEP ONE

Accelerate the bike to a moderate speed, then firmly and evenly apply the brakes until you are at walking speed, then release the brakes. Do not come to a complete stop during this process. Repeat these steps approximately 20 times. You will feel the brakes biting more, or feeling more powerful. Continue the process to ensure an even transfer of braking material.

STEP TWO

Accelerate bike to a faster speed, then firmly apply the brakes until you are at walking speed, then release the brakes.

STEP THREE

Once you have completed this process, let the brakes cool to allow the material to set prior to any additional riding of braking.

And that's it!

Your brakes are now ready to safely bring you to a controlled stop in any condition. Remember to perform this procedure any time you install new rotors and pads to ensure maximum braking performance.

ABOUT SRAM

RELENTLESS

To be the best. It’s why you ride. It’s why we build components. The perfect combination of precision and brute force. No obstacles stopping us. No limitations slowing us down. Ours is a relentless pursuit: to make the climb shorter, the trail smoother, the turn tighter, the descent faster. To give you the strongest, lightest, quickest bike on earth. To be the best.

A HISTORY OF INNOVATION

SRAM was founded on a single product in 1987 and introduced the Grip Shift (or twist shift) shifter to the road bike market in 1988. In 1991 that technology was adapted for mountain bikes, and SRAM quickly grew.

SRAM FUNDAMENTALLY BELIEVES THAT:

• Bicycles improve the environment.
• Bicycles ease traffic congestion.
• Bicycles reduce the cost of transportation.
• Bicycles improve health and reduce obesity.

Cyclists are a passionate user group that support and enhance the areas in which they ride.

SRAM’s products promote sustainability – they empower people to transport themselves and their families at low cost, to stay healthy, and to reduce pollution and improve community by reducing the use of fossil fuel-powered vehicles.

SRAM is proud to deliver quality, exciting, sustainable products to its customers, but our obligation to social responsibility does not start and end with our products. We are also committed to improving our business practices to increase our positive impact on our employees, the people in our communities and those far away, and our planet itself.

Our purpose statement is “We believe in the power of bicycles and expanding the potential of cycling. We create and manufacture components that inspire cyclists.”